tbozeglav Posted May 16, 2009 Report Share Posted May 16, 2009 Not sure where else to post this... figured this would be the best place for now. This topic can be moved if deemed necessary.I am getting ready to do a complete redesign and repaint of my cornhole boards. I've decided to go with a UA theme, but part of the design for the boards calls for actual graphics and decals to be placed on the board. Based on the graphics I wanted to put on the boards, it would be hard for me to hand trace them onto the boards. The easiest option for me is to find a place that can make the graphics I need so its just a matter of buying them, putting them on the boards, and putting the final clear coat over them to finish the boards. However, as I am sure every one of you are chomping at the bit to say, there are copyright laws that prevent me from going anywhere and having them make me these graphics, which is why I am posting this here. I am hoping someone will know of a place that can LEGALLY make me the graphics to complete my cornhole boards. Price isn't necessarily an issue, as long as it doesn't cost me like $100 to have done. For reference, he's the basic look I am going for. Source images used for the graphics aren't very high-resolution, but get the point across: http://i141.photobucket.com/albums/r59/tbo...UAcornhole2.jpgAlso, each graphic is approximately 18" wide by 15" high, if that matters. thanks Quote Link to comment Share on other sites More sharing options...
Dr Z Posted May 16, 2009 Report Share Posted May 16, 2009 I'll have some info for you Monday when I get back to work. If I don't get back to you by the end of next week pm me and remind me. Quote Link to comment Share on other sites More sharing options...
Zipsrifle Posted May 17, 2009 Report Share Posted May 17, 2009 Not sure where else to post this... figured this would be the best place for now. This topic can be moved if deemed necessary.I am getting ready to do a complete redesign and repaint of my cornhole boards. I've decided to go with a UA theme, but part of the design for the boards calls for actual graphics and decals to be placed on the board. Based on the graphics I wanted to put on the boards, it would be hard for me to hand trace them onto the boards. The easiest option for me is to find a place that can make the graphics I need so its just a matter of buying them, putting them on the boards, and putting the final clear coat over them to finish the boards. However, as I am sure every one of you are chomping at the bit to say, there are copyright laws that prevent me from going anywhere and having them make me these graphics, which is why I am posting this here. I am hoping someone will know of a place that can LEGALLY make me the graphics to complete my cornhole boards. Price isn't necessarily an issue, as long as it doesn't cost me like $100 to have done. For reference, he's the basic look I am going for. Source images used for the graphics aren't very high-resolution, but get the point across: http://i141.photobucket.com/albums/r59/tbo...UAcornhole2.jpgAlso, each graphic is approximately 18" wide by 15" high, if that matters. thanksWhat I've done in the past, with varying levels of success, is to Blow the logos up on the computer and print them out. I think make some paper stencils by cutting out the blown up design and taping them together. Next, I put spray adheasive on the back and then spray paint the logos. If you aren't careful, you will get some overspray, but I made my giant "Fear the Roo" magnet which covers my entire tailgate this way, and it turned out great. Hope this helps. Quote Link to comment Share on other sites More sharing options...
Dr Z Posted May 18, 2009 Report Share Posted May 18, 2009 Right click here and select save link as for the logo in vector format, you can make this as big as you want without quality loss.I don't have the FTR logo in a vector format. Quote Link to comment Share on other sites More sharing options...
Captain Kangaroo Posted May 18, 2009 Report Share Posted May 18, 2009 However, as I am sure every one of you are chomping at the bit to say, there are copyright laws that prevent me from going anywhere and having them make me these graphics, which is why I am posting this here. I am hoping someone will know of a place that can LEGALLY make me the graphics to complete my cornhole boards.If you use it for your own personal corn hole board, no one will care. In fact it is probably encouraged.If you use the images and sell your custom Zips corn hole boxes, then someone might get pissed. Quote Link to comment Share on other sites More sharing options...
tbozeglav Posted May 18, 2009 Author Report Share Posted May 18, 2009 However, as I am sure every one of you are chomping at the bit to say, there are copyright laws that prevent me from going anywhere and having them make me these graphics, which is why I am posting this here. I am hoping someone will know of a place that can LEGALLY make me the graphics to complete my cornhole boards.If you use it for your own personal corn hole board, no one will care. In fact it is probably encouraged.If you use the images and sell your custom Zips corn hole boxes, then someone might get pissed.Ohhhhhh okay. I was more or less concerned with going to someone who prints graphics like that and running into legal problems with them doing the work. Thanks for the heads up.Dr. Z, thanks for the file. I am going to have to wait till I get my other computer set up again as I dont have the right software on my laptop. I am going to try to get the FTR logo converted into a vector image, but I have no idea how thats going to go. Thanks for the info you sent me though!I plan on starting work on the boards sometime this week. Ill try to keep you guys posted on how things are going. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.